HASPORT PERFORMANCE S They are backwards in the accord The exhaust must be reduced in length and it is reccomended that you get a cat to match the year header you have. if you have a 94 h22 header get a 94 prelude cat, etc) the 97 header is different and the cat isnt the same. Hasport Performance motor mounts. Manual transmissions for this swap can be found on the following models. 2003 and. It is much taller than the H22 and.
Innovative H-Series Mount Kits - Swap Shop ECU Wiring For Obd1 ecu's vtec soleniod: Pin A4 vtec pressure switch: Pin D6 knock sensor: Pin D3 Secondary Intake Soleniod: Pin A17 Use accord axles Buy a manual for the year prelude your H22 came from, the year of the ecu you have and the car. Goto get them Air Conditioning To keep ac take the bracket off the F22 and put it on the H22 and use the accord compressor For 5TH gen Only Use 92-96 prelude timing belt side mount, keep in mind that you will have to grind it down to fit, and the rest accord mounts Swap pin A6 with pin A11, the accord is unique from other hondas. Innovative H-Series Mount Kits. you can now put an H22 into your 88-91 Civic/ CRX with very little modification. * If you are doing an H22A Swap.
Honda Crx Si with H23a swap - Those 2 wires control the o2 sensor heater and egr control soleniod. Hello Ebay!1988 Honda Crx SI117k. 4.2 final driveESP H22 to EF chassis mountsEsp Traction BarsSlim. 1989 HONDA CRX SI B16A VTEC SWAP 5 SPEED MANUAL.
Hasport Performance Either use all the accord stuff, bracket, hose and pump.. the prelude stuff looks and fits better but if your in a bind the accord stuff will work.. Civic/CRX. 84-87 Civic/CRX AF D-Series AF B-Series AF 88-91 Civic/CRX EF D-Series EF B-Series EF. © Hasport Performance. All Rhts Reserved.
Honda Civic Crx D To H Series Engine Swap To keep the Powersteering you must have a custom line made using the lower 1/2 of the accord line and upper 1/2 of the prelude line OR use a 97 prelude pump and bracket For 4TH Gen Only Use all accord mounts The exhaust bolts up to 93-96 Prelude header No pin swaping is required There are 2 ways to do the powersteering.. CRX D to H series H22/H23. Perfect for those who are looking to do a H Series Engine Swap H22. please refer to a shop/factory manual for installation.